Inkoloy800H/ UNSN08810/ Alloy800H Seamless Tube For Heat Exchanger, Moetsi oa Sheet
Lihlahisoa tse fumanehang
Tube e se nang seam, Plate, Ropa, Forgings, Fasteners, Pipe Fittings
Maemo a Tlhahiso
| Sehlahisoa | ASTM |
| Sebaka | B 408 |
| Letlapa, Leqephe le Lekhapetla | A 240, A 480, B 409, B 906 |
| Liphaephe le li-fittings tse se nang moeli | B 407, B 829 |
| Peipi e cheselitsoeng | B 514, B 775 |
| Lisebelisoa tse cheselitsoeng | B 515, B 751 |
| Khokahano ea solder | B366 |
| Ho qapa | B 564 |
Sebopeho sa Lik'hemik'hale
| % | Fe | Ni | Cr | C | Mn | Si | S | Cu | Al | Ti | P | Al+Ti |
| Min | 39.5 | 30.0 | 19.0 | 0.06 |
|
|
|
| 0.15 | 0.15 |
| 0.85 |
| Max |
| 35.0 | 23.0 | 0.10 | 1.50 | 1.00 | 0.015 | 0.75 | 0.60 | 0.60 | 0.045 | 1.20 |
Lintho Tsa 'Mele
| Botenya | 7.94 g/cm3 |
| Ho qhibiliha | 1357-1385 ℃ |
Bonyane Mechanical Properties Of Inkoloy 800H Alloy Ka Mocheso oa Kamore
| Alloy | Rm N/mm2 | RP0.2N/mm2 | A5 % |
| 800 | 500 | 210 | 35 |
| 800H | 450 | 180 | 35 |
Corrosion Resistance Of Inoloy 800H
Incloy 800H e hanana le mecha e mengata e senyang.Likahare tsa eona tse phahameng tsa nickel li etsa hore e se ke ea hanela khatello ea maikutlo ho senyeha ha maemo a metsi a kutu.Likahare tse phahameng tsa chromium li fana ka khanyetso e betere ea pitting le mapetsong a mafome.Alloy e na le khanyetso e ntle ea kutu ho nitric acid le organic acid, empa ho hanyetsa kutu ho lekanyelitsoeng ho sulfuric acid le hydrochloric acid.Ho hanyetsa kutu ho hotle ka matsoai a oxidizing le a se nang oxidizing, ntle le monyetla oa ho kenya kutu ka har'a halides.E boetse e na le khanyetso e ntle ea ho bola metsing, mouoane le metsoako ea mouoane, moea le carbon dioxide.
Inkoloy 800H e na le Thepa e Latelang
1. Ho hanyetsa kutu e ntle haholo mochesong o phahameng haholo oa metsi a nang le metsi ho fihlela ho 500°C
2. Ho hanyetsa hantle khatello ea maikutlo
3. Ho sebetsa hantle
Inkoloy 800H Libaka tsa Kopo
1. Nitric acid condenser - e hanyetsanang le kutu ea nitric acid
2. Mouoane o futhumatsang tube - thepa e ntle ea mechine
3. Heating element tube - thepa e ntle ea mechine
Bakeng sa lisebelisoa ho fihlela ho 500 ° C, alloy e fanoa ka boemo ba annealed.
